Media Handling
Please follow the following procedure when you feed your sheets with labels and signs in your OKI printer. We recommend you use the general tray and load the sheets as shown below (you can also see it on YouTube by clicking here).
Separate the sheets first:
OKI C610, C612, C650, C710, C711, C712, ES6412 and ES7412
1. Open the Multi-Purpose tray on the front of the printer; the OKI C650 to the right:
2. Multi-Purpose Tray open:
3. Push the tray down close to the printer; On the C650 open the bar in the center:
4. Before loading labels into the Multi-Purpose Tray elevator down the bottom of the cassette with your finger. push:
5. First, air the Labels as described above. Load the labels on the Multi-Purpose Tray and adjust the page size manually. do it by pushing from the side according to the label sizes. For our buttonhole labels, the way of loading from the Multi-Purpose Tray, the perforations should face you when you stand in front of the printer. Feeding settings for our Adhesive, Hanging and Pot labels should be as in the pictures.
6. After feeding the labels to the Multi-Purpose Tray, lift the paper elevator up by pushing the blue color catch on the side to the left (it has an arrow mark) when you stand in front of the printer. If this operation is not done, the printer will constantly give out paper warning.
7. How to load our core labels from Tray 1:
